GPGATE GP3EVF200 6V 200Ah deep cycle flooded battery used for material handling trucks, tractors, mining vehicles, and for golf carts.
Deep Cycle Flooded Battery Material handling trucks/Tractors/Mining vehicles/Golf carts
GPGATE® Deep cycle flooded batteries outperform traditional batteries and are a resilient battery solution for material handling trucks, tractors, mining vehicles, and for golf carts. The batteries exceed rigorous safety tests and incorporate design features that adhere to discharge performance, wide operating temperatures and long duration cyclic current draws.
MECHANICAL SPECIFICATIONS
| Industry Reference | ISO9001 | |
|---|---|---|
|
Length A (in/mm) |
10.1 |
258 |
|
Width B (in/mm) |
7.2 |
182 |
|
Height C (in/mm) |
10.7 |
270 |
|
Total Height D (in/mm) |
10.7 |
274 |
|
Weight (lbs/kgs) |
77.2 |
35 |
|
Terminal * |
M8xΦ20 |
|
|
Technology |
EVF |
|
NOTE 1: Dimensions have a ±2 mm (0.08 in) tolerance. Weights may vary.
NOTE 2: Refer to terminal guide on website for torque values.
PERFORMANCE SPECIFICATIONS
| Amp Hours (AH) | ||
|---|---|---|
|
10 HR |
20 HR |
|
|
200 |
220 |
|
ELECTRICAL SPECIFICATIONS
| Voltage (V) | 6 |
|---|---|
|
Internal Resistance (mΩ) |
5 |
|
Short Circuit (A) (20°C / 68°F) |
1600 |
|
Self-Discharge (20°C / 68°F) |
2-3% per month |
|
Charge Temperature |
Min: -10°C (14°F) | Max: 50°C (122°F) |
|
Storage Temperature |
Min: -10°C (14°F) | Max: 50°C (122°F) |
NOTE 3: Extra considerations must be given when designing systems for use at maximum temperatures.
NOTE 4: Internal Resistance is approximate.
FEATURES
Selling points
EVF deep cycle AGM batteries are designed for frequent deep cycle discharges. Using active materials and a robust grid, EV series sealed lead-acid batteries provide reliable performance under high load conditions and can deliver over 300 cycles at 100% DOD. Suitable for scooters, electric wheelchairs, golf carts, etc.
High-purity raw materials and high-performance AGM separators
Excellent low temperature performance and vibration resistance
Excellent cycle life and deep cycle recovery performance
Sealed structure and maintenance-free
High pressure relief valve reduces water loss and extends service life
Integrated flame arrestor prevents fire and explosion.
CERTIFIED QUALITY
GB/T 22199-2008 、GB/T18332.1-2009 ；Passed ISO9001、ISO14001、ISO18001、CE certificate
SHIPPING CLASSIFICATION
- Classified as a nonspillable battery
- Without restriction for transport by Sea (IMDG amendment 27)
- Without restriction for transport by Air (IATA/ICAO provision 67)
- Without restriction for transport by Ground (STB, DOT-CFR-HMR49)
Discharge Characteristics (25°C)
The Relationship for Open Circuit Voltage and Residual Capacity (25°C)
Charging Characteristics (25°C)
Cycle Life on D.O.D (25°C)
NOTES
1. Due to self-discharge characteristics of lead-acid battery technologies, batteries should be top charged within 6 months of storage to ensure optimum performance, prevent sulphation and permanent capacity loss.
2. Charge profile recommendations correspond to battery voltages at 25°C (77°F). For temperatures below, adjust +5mVPC/°C (+3mVPC/°F). Temperatures above, adjust -5mVPC/°C (-3mVPC/°F). Temperature compensated charging helps ensure optimum battery runtime and life performance.
3. Charge profile recommendations depend on application and charger. IUI (or IUI with Pulse) is appropriate for applications that require frequent and deep discharges. IUU is appropriate for applications that are on standby and cycled less frequently.
4. IUI with Pulse algorithm uses a pulse termination criterion. The finish current is pulsed on and off in order to keep the battery voltage at a minimum while still reaching target overcharge. If average VPC exceeds U2 and the charger output has been on for more than 30 seconds, the output is shut off until VPC falls to U3.
5. IUI Charge Profile (if applicable), may have a continuous float phase added (2.27VPC).